49-node Indoor Mesh

From WirelessAfrica
Revision as of 16:39, 23 November 2005 by Yusufk (talk | contribs) (→‎Introduction)
Jump to navigation Jump to search

Introduction

Their are a plethora of mesh routing protocols being used worldwide today (See: Wireless Mesh Networking). Some of these have become popular due to organizations taking the trouble to convert the specification into usable code that can be run on a wireless router while other protocols remain purely academic and have only been run on computer simulations. There is also a new 802.11s working group which is seeking to create Mesh Standards. Protocols for which code is available will be run on the massive mesh indoor testbed which consists of a grid of 49 nodes. Some code will also be ported to run on the massive mesh - for example HSLS is being ported to FreeBSD and Linux. Performance metrics will be gathered such as average throughput and latency together with their variance.

Massive-mesh-layout.jpg

Mobility on wireless mesh networks is also a feature that we aim to test. One method of doing this is by using roaming nodes built onto Robots like the line follower Lego robot shown in the picture. Each protocol is generally suited to different scenarios, some scale better to very large meshes due to less broadcast traffic others are better at handling mobility. Once all these metrics are gathered, better protocol choices can be made when a mesh network is built.

Robot00001-small.jpg

The thumbnail images on the right show two scenarios represented by the OLSR Dot Draw visualization tool. The 1st image shows mesh configuration with no omni antennas attached, while the 2nd image shows mesh configuration with an omni attached to node 44.

Office-mesh-no-omni.jpg
Office-mesh-omni44.jpg

Other visualization tools are also being worked on.