HPN to-do/done page

From WirelessAfrica
Revision as of 15:02, 2 June 2009 by JHugo (talk | contribs) (New page: == HPN version 1 - To-do/done == === Done === ==== Nodes: ==== Automatic, Multi Radio configuration and meshing (using OLSR mesh protocol) Automatic IPv6 addressing Automatic IPv4 addr...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

HPN version 1 - To-do/done

Done

Nodes:

Automatic, Multi Radio configuration and meshing (using OLSR mesh protocol)
Automatic IPv6 addressing
Automatic IPv4 addressing
Automatic IPv4 over IPv6 tunneling
End-to-end connectivity in the mesh over IPv4 or IPv6
Automatic time synchronization with GateWay via ntp time protocol
Automatic "Node Name" generation and registration into DNS
Automatic HotSpot setup
Automatic DHCP and DNS services on Ethernet and Wifi hotspot
Automatic router advertising on IPv6
Automatic OLSR HNA advertising of Ethernet and hotspot subnets
Automatic OLSR HNA advertising of all 4over6 tunnels
IPv6 enabled Web server
Remote management via ssh
Command line routing information
Command line signal strenth indicator
"OLSR vis" network visualization tool
Intergated and external watchdog
Automatic firmware checking and updating if it's available
Automatic hunting / channel selection function
Green/red node selection - in startup scripts + after hunting
Shell scripts for signal strength display / alignment

GateWay:

Automatic time synchronization and NTP server for the mesh
Automatic DNS server for the mesh
Automatic Default Gateway advertising into the mesh via OLSR

To-do:

Nodes:

Automatic hunting / activate in GUI - on next boot or online
Red/Green selection via GUI
LED display function - visual status of link connectivity
FreeBSD device driver for LEDs
Hostname update via GUI
info.txt generation during bootup
Web interface for node with configuration / statistics
Alignment tool (under Web interface)
fix auto IPv4 subnet selection (avila MAC byte swap)
Change default diversity settings in rc.conf.mesh
Change default channel/BSSID settings in rc.conf.mesh
Change default ack timoutout settings in rc.conf.mesh for 10km
Generate new IPv6 prefix for APEX
Attend to olsr multipath smooth changeover
External watchdog board
Upgrade to FreeBSD 7.2 ?

GateWay:

Automatic gateway selection function ?
Settings for DHCP, IPv4 addr, Default GW, DNS server, NTP server
Change these setting via GUI
Synchronize with upstream DNS server
Synchronize with upstream NTP time server
FTP server for firmware updates

Backbone backend

Procure server
OS + software on server
Monitoring of backbone ?
SANREN connection ?