Home-Brew Antennae: Difference between revisions

From WirelessAfrica
Jump to navigation Jump to search
m (Reverted edit of Nichole, changed back to last version by Yusufk)
 
(2 intermediate revisions by 2 users not shown)
Line 4: Line 4:
==Directional Antennae==
==Directional Antennae==
===Cantenna===
===Cantenna===
The instructions shown the websites listed on [[Links#Antennae]] were used ti build some cantennae as shown in the pictures:
The instructions shown the websites listed on [[Links#Antennae]] were used to build some cantennae as shown in the pictures:


[[Image:P9170496.jpg|thumb|left]]
[[Image:P9170496.jpg|thumb|left]]

Latest revision as of 10:11, 30 May 2006

Omnidirectional Antennae

It is possible to make a homebrew omnidirectional antenna, as shown in the guides listed on Links#Antennae.

Directional Antennae

Cantenna

The instructions shown the websites listed on Links#Antennae were used to build some cantennae as shown in the pictures:

P9170496.jpg
Cantenna.jpg
Cantenna2.jpg









Left to right,Cantenna on Tripod, Conical Feed element and Cantenna with bicycle spoke element

This File:Circular waveguide optimise.xls can be used to optimise the variables when building a cantenna.

Sectoral Antenna

A sectoral antenna provides the best of both worlds in terms of gain as well as beam-width and can be applied to many situations in mesh networking.

Turn an Omni into a Sector

The reflector designs shown, found at Freeantennas.com can be applied to a standard omni and will turn the omni into a sectoral antenna.

Template.jpg
Wet-11.jpg













Metal sheeting can be used for the reflector, however, the ideal would be some sort of mesh metal, with holes smaller than 1/4 wavelength (<3cm), so that the antenna is not affected by wind as much.

Simulation

NEC 2 was used to generate the simulated field pattern for a cantenna with the dimensions used in our first test cantenna.

Simulation.jpg