Adhoc networking Protocol benchmarks

From WirelessAfrica
Revision as of 15:17, 20 October 2006 by Kingdavid (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Team members

  • David Johnson


Abstract

Protocols (OLSR, AODV, HSLS, ZRP) for which code is available will be run on the massive mesh indoor testbed which consists of a grid of 49 nodes and on a computer simulator (Omnet++). Performance metrics will be gathered such as average throughput and latency together with their variance. Their are also plans to create some mobile nodes that roam around the grid using a robot to test mobile performance. Each protocol is generally suited to different scenarios, some scale better to very large meshes due to less broadcast traffic others are better at handling mobility. Once all these metrics are gathered, better protocol choices can be made when a mesh network is built. A suitability matrix will be built


Introduction

A network is made up of nodes. The complextiy of mesh routing would make it very difficult, if not imnpossible to configure and manage large mesh networks. Therefore, intelligence has to be built into the nodes so that they can handle some of the configuration and management of the network. This becomes more important when the users/owners of the network aren't very computer literate. There are several aspects to this intelligence including the routing algorithms that tell the node how to route information to other nodes. These algorithms are implemented in Mesh routing protocols.

These nodes also need to be affordable, especially in the case of rural networks.

Mesh Routing Protocols

A large amount of research at Meraka CSIR will go into comparing the performance of various mesh routing protocols and understanding their suitability to different networking scenarios such as network size, latency and throughput requirements and the amount of mobility. Below is a list of mesh networking protocols that will be tested on our testbed networks.

OLSR


Optimized Link State Routing was developed by P. Jacquet at INRIA in france. This is a proactive protocol that addresses the issue of flooding the network with link state information across the network. OLSR reduced the overhead of by requiring fewer nodes to forward the link state information. This is done broadcasting a lnk state from node X through select multipoint relays.

Optimised Link State Routing

More info: OLSR


AODV


Ad-hoc On-Demand Distance Vector Routing was developed by C. Perkins while working at Sun Microsystems Laboratories. This is a reactive protocol that attempts to improve on DSR by maintaining routing tables with one entry per destination at the nodes. When a source node needs a route to a destination, it initiates a route discovery process to locate the destination node. The source node floods a query packet requesting a route to be set up to the destination. A reply is sent back directly to the source node either by the destination itself or any other intermediate node that has a current route to the destination. Since nodes reply to the first arriving route request, AODV favours the least congested route instead of the shortest route.

Ad-hoc On-Demand Distance Vector Routing

HSLS


Hazy Sighted Link State Routing was developed by BBN and implemented by cuwireless(See CuWIN Visit). In general a reactive protocol is local (only knows about its immediate neighbours) and a proactive protocol is global (stores routing information for entire network). HSLS is neither glocal nor local, each node has a different view of the network. The link -state approach that is followed is: send an update every ti seconds with a network scope of ri hops. The HSLS algorithm finds ti and ri so that the performance is optimized. HSLS is performance-driven, focusing on average system performance instead of focusing on handling exceptional rare cases whose impact on the overall system performance is not clear.

Hazy Sighted Link State Routing


ZRP


The Zone routing protocol was developed by Z.J. Haas (Associate professor, Cornell University), a lead researcher in the field of Ad Hoc networking. The ZRP is an example of a hybrid reactive/proactive routing protocol. On one hand, it limits the scope of the proactive procedure only to the node’s local neighbourhood, minimizing the waste associated with the purely proactive schemes. On the other hand, the search throughout the network, although it is global, is performed by efficiently querying selected nodes in the network, as opposed to querying all the network nodes. The protocol identifies multiple loop-free routes to the destination, increasing reliability and performance. Routing is flat rather than hierarchical, reducing organizational overhead, allowing optimal routes to be discovered, and reducing the threat of network congestion. Haas explains that the most appealing feature of the protocol is that its behaviour is adaptive, based on the current configuration of the network and the behaviour of the users.

Zone Routing Protocol


This protocol is very attractive for a city type network which will consist of both static wireless nodes installed on structures such as houses and moving nodes which could be people or cars. The local neighbourhood to the moving nodes can be proactive and react quickly whereas the static intrazone backbone will operate on a proactive scheme.


Other


Mobile Mesh One of the first mesh routing implementations that was looked at is, MobileMesh for Linux and the Windows equivalent IpMesh. The interest/activity around these seemed to be fading with the implmentation of more popular routing protocols like OLSR.


Standardisation


The IEEE and IETF are working on Mesh Standards.


Milestones

  1. 12 June: Work in Progress paper submission for SATNAC
  2. 3-6 September: SATNAC conference - Stellenbosch
  3. 22 October: Submmission date for masters at University of Pretoria