Home-Brew Antennae: Difference between revisions
m (→Cantenna) |
|||
| (4 intermediate revisions by 3 users not shown) | |||
| Line 4: | Line 4: | ||
==Directional Antennae== | ==Directional Antennae== | ||
===Cantenna=== | ===Cantenna=== | ||
The instructions shown the websites listed on [[Links#Antennae]] were used | The instructions shown the websites listed on [[Links#Antennae]] were used to build some cantennae as shown in the pictures: | ||
[[Image:P9170496.jpg|thumb|left]] | [[Image:P9170496.jpg|thumb|left]] | ||
Latest revision as of 10:11, 30 May 2006
Omnidirectional Antennae
It is possible to make a homebrew omnidirectional antenna, as shown in the guides listed on Links#Antennae.
Directional Antennae
Cantenna
The instructions shown the websites listed on Links#Antennae were used to build some cantennae as shown in the pictures:
Left to right,Cantenna on Tripod, Conical Feed element and Cantenna with bicycle spoke element
This File:Circular waveguide optimise.xls can be used to optimise the variables when building a cantenna.
Sectoral Antenna
A sectoral antenna provides the best of both worlds in terms of gain as well as beam-width and can be applied to many situations in mesh networking.
Turn an Omni into a Sector
The reflector designs shown, found at Freeantennas.com can be applied to a standard omni and will turn the omni into a sectoral antenna.
Metal sheeting can be used for the reflector, however, the ideal would be some sort of mesh metal, with holes smaller than 1/4 wavelength (<3cm), so that the antenna is not affected by wind as much.
Simulation
NEC 2 was used to generate the simulated field pattern for a cantenna with the dimensions used in our first test cantenna.
