High Performance Node - Specification

Hardware

Current Bokkie router

HPN based on current “Bokkie” router, to become “Bokkie v2”

Block Diagram of HPN

Block diagram of HPN

Enclosure

• Based on Poynting Enclosure (Product code:WLAN-A0033)
• Modification: swap 1x 2.4 GHz omni-directional antenna for 1x 5.8 GHz omni-directional antenna

Electronics

• 1x Gateworks Avila Board
• 3x 802.11a/b/g mini PCI Atheros based WiFi cards
  • 2x configured at 5.8 GHz
  • 1x configured at 2.4 GHz
• 1x 1GB compact flash card
• 3x U.FL to SMA connectors

Enclosure - Other

• 1x External weatherproof Ethernet connector with Ethernet pigtail for POE (install on left side – looking at bokkie – keeping with current standard)
• 4x Gateworks board mounting standoffs
• External Mounting bracket

Accessories

• Powered 48V power-over-Ethernet injector
• Ethernet Cables
  • 1x UV resistant outdoor CATV cable [have different lengths available (5m, 10m, 20m)]
  • 1x indoor CATV cable [have different lengths available (5m, 10m, 20m)]
  • Need for longer cables, custom make ?
• Some type of surge protection. Thinking of a product from http://www.clearline.co.za/. Still need to investigate

Other

• Wall mounting bracket (different types depending on type of wall - spec)
• Mounting pole (different types - spec)
• M10\M12 Coach Screws and fisher plugs (# depending on wall mounting bracket)
• 10x pack Cable ties
• Earthing kit Webb Industries have earthing kits that can be used. see http://www.webb.co.za/index.php?nav=news&ID=50
  • Earthing spike (driven into the ground at base of wall of the wireless installation
  • Clamp on wireless installation bracket
  • Clamp on spike for earthing wire
  • Length (?), Guage (?) of earthing wire

Software

Firmware: "bokkie1 mesh distribution"

This software specification is based on the current free BSD version of the firmware. I have named it "bokkie1 mesh distribution" as a working title (for want of a better name - please provide a nice snazzy one)

• A script is used to build the current firmware build based on the platform. Please insert the list of packages\utilites\etc used to make this build.

• Additional
  • IPv4 over IPv6
    • Allows for automatic configuration of the tunnels
    • Automatic DHCP of IPv4
  • Other?

GUI

Current details and functionality of the GUI

What configurations are done on the command line

Need details for further development on the GUI

Remote upgradeable

What current functionality exists?

What further development is needed?

What limitations exits?

• Cannot be remotely upgraded if there is a protocol change

Further development to functionality

• GSM modem to the development network and first nodes in the field
• Watchdog
• WEP security
• Mechanism to get the GPS co-ord configured in the HPN. This can later be used in the visualisation tool on the gateway with a Google plot of the nodes.