Home-Brew Antennae

Omnidirectional Antennae

It is possible to make a homebrew omnidirectional antenna, as shown in the guides listed on Links#Antennae.

Directional Antennae

Cantenna

The instructions shown the websites listed on Links#Antennae were used ti build some cantennae as shown in the pictures:

Cantenna on Tripod Conical Feed element Cantenna with bicycle spoke element

This File:Circular waveguide optimise.xls can be used to optimise the variables when building a cantenna.

Sectoral Antenna

A sectoral antenna provides the best of both worlds in terms of gain as well as beam-width and can be applied to many situations in mesh networking.

Turn an Omni into a Sector

The reflector designs shown, found at Freeantennas.com can be applied to a standard omni and will turn the omni into a sectoral antenna.

Metal sheeting can be used for the reflector, however, the ideal would be some sort of mesh metal, with holes smaller than 1/4 wavelength (<3cm), so that the antenna is not affected by wind as much.

Simulation

NEC 2 was used to generate the simulated field pattern for a cantenna with the dimensions used in our first test cantenna.