Revision as of 15:40, 21 November 2005

What do I need to connect to PTA mesh?

This can either be a PC or a Wireless Router.

This can either be bought or home-made(see Home-Brew Antennae).

You will also require cables, a POE convertor, a pole and brackets.

Your wireless router may require firmware updates that will be made available here.

If you are using a PC, you may need to install an OLSR client.

If you want to be part of a Virtual Private Network, you will require VPN software on your client.

@@ Line 1: / Line 1: @@
-===Mesh Node===
+=What do I need to connect to PTA mesh?=
-How do I put together my own mesh node?
+==Hardware==
+===Node===
+This can either be a PC or a [[Wireless Router]].
+===Antennae===
+This can either be bought or home-made(see [[Home-Brew Antennae]]).
+===Other===
+You will also require cables, a POE convertor, a pole and brackets.
+==Firmware==
+Your wireless router may require firmware updates that will be made available [ftp://comingsoon here].
+==Software==
+===Routing===
+If you are using a PC, you may need to install an OLSR client.
+===VPN===
+If you want to be part of a Virtual Private Network, you will require VPN software on your client.
+==Settings==
+===IP Allocation===
+.***.***.***/**
+===OLSR Settings===
+HNA:
+=How do I build my own mesh node?=